Remapping

Diesel Particulate Filter (DPF) Friendly

DPF FilterMany modern cars are vulnerable to DPF blockage, especially when they are subjected to driving conditions that are incompatible with automatic DPF regeneration.

For example, if the car is mainly driven in slow moving traffic or used for short journey commuting, where the engine is rarely subjected to the driving conditions necessary for effective DPF regeneration, a build up of particulates in the filter can occur, ultimately leading to blockage.

The problem may be exasperated by overzealous engine remapping or crude ‘diesel tuning boxes’ which can increase the amount of unburned fuel entering the exhaust system in the form of particulates.

The result is the inconvenience of frequent trips to the dealer for ‘forced regeneration’, which may be a chargeable job.

The Select-A-Map ECU reduces the risk of DPF problems by allowing any increase in fuel to be governed by engine speed and load so that fuelling can be accurately controlled to reduce particulate emissions to a minimum. Uniquely, with 5 instantly switchable maps to choose from, it is also possible for the Select-A-Map ECU to be configured to automatically default to a standard or more DPF friendly map under normal driving conditions, allowing any of the enhanced performance maps to be selected only when needed.

DPF Removal

An additional plug-in emulation module is also available for use with the SELECT-A-MAP. This will appease the engine management system of most vehicles and prevent them from going into limp mode, if the DPF were to be removed.

Rolling Road plot showing diesel mapping capability

The SELECT-A-MAP ECU offers the driver a choice of maps that can be switched in an instant, allowing power to be increased only when needed, therefore reducing fuel consumption and further reducing any risk of DPF problems.

High Torque and Higher BHP

High Torque and Lower BHP

Standard Torque and BHP

Rolling Road Plot
Introduction
Select-A-Map - Diesel Remap ECU

The world's most advanced diesel performance computer

The SELECT-A-MAP Diesel Control ECU is a new generation, diesel control computer that is undoubtedly the most sophisticated and advanced tuning product available anywhere.
Click here to view or download the brochure

A complete fuel remap with all the convenience of a tuning box

Select-A-Map ECU The Select-A-Map ECU is quite simply a revolution in vehicle remapping. It combines most of the benefits of a conventional diesel ECU remap with the ease of installation of a diesel tuning box. It is designed to be highly universal, making it compatible with most common rail diesel engines and it contains a host of other features not found in any other product.

The only non-intrusive remapping solution

Using patented technology, developed in the UK by the fuel injection experts at CRD Technology, the Select-A-Map ECU allows your vehicle to be remapped without cutting wires or making any modification to your vehicle's ECU. This not only makes for a quicker installation time, but also makes transferring to another vehicle possible and greatly reduces the risk of invalidating your vehicle's warranty.

Select-A-Map System Diagram – Click to Enlarge
Select-A-Map Block Diagram
Click here to view or download the brochure

Power, speed and accuracy

To maintain engine efficiency and reduce the risk of Diesel Particulate Filter blockage, it is imperative that any modifications to the quantity of fuel injected are precisely metered and timed. The Select-A-Map ECU achieves this by accurately monitoring fuel rail pressure as well as injector opening times, using a unique, non-intrusive injector sensing method. It performs many millions of calculations per second, enabling it to compute engine speed and load values instantly so that the exact quantity of fuel required is always injected at exactly the right moment.

Advanced Features

Using the same principle as a professional ECU re-map to create a mirror image of the vehicle's own ECU fuel map, the SELECT-A-MAP creates 5 different maps that are instantly switchable using the remote key fob with the ignition on or engine at idle. Select-A-Map Remote Control Key Fob

1) Standard Map

Standard torque and standard power.

2) Economy Map

Increased torque and standard BHP to enable optimum economy – Can be refined to operator's specific requirements.

3) Fast Road Map

Increased torque and increased BHP for everyday driving, while retaining good driveability and improved economy, with no adverse effect on DPF.

4) Very Fast Road Map

Tuned to give the highest Torque and highest Power for occasional fast road or track day use.
Note: Prolonged use of this map could result in more frequent DPF regeneration and, since it provides uncompromising levels of performance, fuel consumption will likely increase.

5) Reduced Power Map

Low Power or 'Valet' option enables already powerful cars to be used by less experienced drivers.

Any of the predefined maps can be used as is or, as an optional extra service, the installer can further refine any map* to suit individual requirements.

No single map is right for every purpose. Vehicle manufacturers are forced to compromise by producing a map that meets emission regulations while providing acceptable economy and performance.

ECU re-map specialists experience similar problems when working with a single map; improvements can be made in some areas but never in all areas.

By offering 5 customised, instantly switchable maps, it is possible to provide an uncompromising solution that can be tailored to suit any purpose and every customer.

Some re-mapping companies offer customers an optional OBD handset that allows switching between 2 maps, but this procedure can take several minutes to perform and carries a risk that a data error could render the vehicle's ECU inoperable.

A specific map can be selected as the default map to revert to at power-up/ignition-on. For example, it may be preferable to always start the vehicle with a standard/100% map or, for added security, a reduced-power or ‘valet mode’ map. Note: One exception to this is Map 5 which, when selected, remains selected, regardless of any default map settings or ignition status, until a different map selection is made.

* Additional mapping costs may be charged.

 

Select-A-Map Diesel Control ECU - Performance | Economy | Choice
A complete fuel remap with all the convenience of a tuning box
The Select-A-Map ECU is quite simply a revolution in vehicle remapping. It combines most of the benefits of a conventional ECU remap with the ease of installation of a diesel tuning box. It is designed to be highly universal, making it compatible with most common rail diesel engines and it contains a host of other features not found in any other product. Read more …

 

For more technical and installation information, visit the CRD Perfomance website.

Who we are

Boost GuageWe are passionate motor enthusiasts with many years hands-on experience in the retail motor industry and our team packs in over 100 years of motor trade and advanced electronics experience with car and commercial vehicle manufacturers, specialist performance centres and franchised dealers.

Our advanced electronics lab is staffed by some of the leading designers in the specialised field of applied vehicle engine control electronics, who have worked closely with our vehicle fuel systems engineers to produce several different ECU applications, all based on the same Patent protected technology.

Where we are

CRD Technology Limited
Burnden Industrial Estate
Manchester Road
Bolton
Lancs BL3 2NG

 

 
View Larger Map